PUT THE WIND WIZARD IN YOUR SPRAY BOOTH TODAY, PAINT MORE CARS TOMORROW.

At Centerline Spraybooths, we are proud to offer the WIND WIZARD to auto body shops in the Tri-State area who are looking to maximize efficiency while improving the overall quality of their auto paint jobs. The WIND WIZARD gives auto body shops the ability to paint more cars with waterborne paint in far less time, thanks to its advanced waterborne drying capabilities. The WIND WIZARD frees up the biggest bottleneck in every body shop, which is the spray booth and slow paint drying times. Using the latest advancements in spray booth fans, the WIND WIZARD speeds up and adds savings to the entire auto paint job process.

Not only that, but the WIND WIZARD also enhances the auto body shop’s ability to produce quality paint jobs by moving more air than any other waterborne fans on the market. By shortening both base coat dry times and clear coat bake times, the WIND WIZARD maximizes production while reducing running costs. If you’re spraying waterborne paint and are looking for the best waterborne spray booth blower for your auto body shop, the WIND WIZARD is a must-have and an absolute key to profitability in the competitive Tri-State areas of New York, New Jersey, Connecticut, and parts of Massachusetts.

Prior to distribution and installation of the WIND WIZARD, many body shops reported drying of waterborne paint taking more than 20 minutes. With the WIND WIZARD, auto paint drying time has been reduced to under five minutes. Because of this, the WIND WIZARD allows your employees to put very little time and effort into drying paint and just focus on applying it. 

Production is not only dramatically shorter with the WIND WIZARD — it is also far more consistent, which means temperature and humidity won’t cause unexpected backups. Water-based paint drying has never been this easy!

INSTALLATION IS A BREEZE!

When you choose Centerline Spraybooths for your WIND WIZARD waterborne dryers, all units come completely assembled, which means very little downtime during the installation. Four-corner or offset units can be mounted by our skilled technicians in around an hour, with a through-the-wall unit adding approximately one hour to the installation. Other water-based drying systems result in days of downtime and unnecessary damage to your spray booth design, making WIND WIZARD waterborne fans from Centerline the clear choice for your spray booth blower needs. 

WIND WIZARD UNITS

With four different types of units and custom units available, the WIND WIZARD can be retrofitted into any existing spray booth — and our experienced technicians at Centerline can install it in any auto body shop in the Tri-State area. Each waterborne drying unit comes with its own motor and fully adjustable nozzles, and a laser light is supplied to aim the nozzles so that air is directed exactly where it needs to be. All WIND WIZARD units are completely explosion-proof. They draw in heated, filtered cabin air and filter it again through the top or front of the unit with 99.4 percent efficiency filters. Check them out below!

Corner Unit

[grid_row_open class=””]

[grid_col_open class=”” palm=”100%” tablet=”50%” desktop=”50%” center=””]

[grid_col_close]

[grid_col_open class=”” palm=”100%” tablet=”50%” desktop=”50%” center=””]

[grid_col_close]

[grid_row_close]


Offset Left Unit

[grid_row_open class=””]

[grid_col_open class=”” palm=”100%” tablet=”50%” desktop=”50%” center=””]

[grid_col_close]

[grid_col_open class=”” palm=”100%” tablet=”50%” desktop=”50%” center=””]

The offset unit is for door openings that require room for clearance by a door.

[grid_col_close]

[grid_row_close]


Offset Right Unit

[grid_row_open class=””]

[grid_col_open class=”” palm=”100%” tablet=”50%” desktop=”50%” center=””]

[grid_col_close]

[grid_col_open class=”” palm=”100%” tablet=”50%” desktop=”50%” center=””]

[grid_col_close]

[grid_row_close]


Through The Wall Unit

[grid_row_open class=””]

[grid_col_open class=”” palm=”100%” tablet=”50%” desktop=”50%” center=””]

[grid_col_close]

[grid_col_open class=”” palm=”100%” tablet=”50%” desktop=”50%” center=””]

The through-the-wall unit is for a booth where a corner unit is not an option. This unit is placed through an opening made in the wall panel and sits mostly outside of the booth (it only uses clean air from within the cabin).

All four of these units allow for the system to be retrofitted and work in any existing spray booth.

[grid_col_close]

[grid_row_close]


Elite Control Panel

[grid_row_open class=””]

[grid_col_open class=”” palm=”100%” tablet=”50%” desktop=”50%” center=””]

[grid_col_close]

[grid_col_open class=”” palm=”100%” tablet=”50%” desktop=”50%” center=””]

COMPUTERIZED CONTROL PANEL WITH TOUCH SCREEN CONTROL

Left: Main panel is mounted in an open space in the shop near the spray booth. This contains all components for the system, including four motor overloads and for variable frequency drives.
Below: System can be fully controlled at touch-screen controller, which is run from main panel and magnetically attaches to the spot of the painters choice.

[grid_col_close]

[grid_row_close]

Elite Features

ELITE FEATURES INDEPENDENT ON/OFF CONTROL: Painter can operate all four waterborne blowers by pressing the start button or can operate only needed blowers by pressing individual start buttons

SPEED CONTROL: Four-variable frequency drives gives you the ability to adjust the air speed of the waterborne fan. Drives also improve energy efficiency and extend motor life.

TIMED CONTROL: User can run waterborne blowers for a timed period, with the desired time entered on the touch screen. Motors will run for a set time, and the screen will display time remaining while they run. Then they will automatically shut down and alert the painter with a buzzer. The timer then resets for the next drying period.

AUTO MODE: When enabled, the auto mode of the waterborne fan runs blowers automatically in bake. This creates a convection oven that transfers the hot cabin air to car parts faster. The result is a dramatically shorter bake time and a much harder finish on the clear coat.

REMOTE CONTROL: Gives the painter ON/OFF control from a handheld remote that can be used inside the cabin.